BETA-CAE Systems 24.1.1
BETA-CAE Systems 24.1.1 | 2.1 Gb
BETA CAE Systems announces the release of the 24.1.1 of its software suite. This brand-new release adds value to the preceding tools and features of the v24.x series, offering accelerated performance, explicit fixes to critical bugs, along with various process customization enhancements.
What's new in BETA CAE Systems 24.1.1
Known issues resolved in ANSA
General
Units" conversion through "Settings > Resolution/Tolerances/Units [Units> Scale]" would take excessive time. It is now accelerated from minutes to milli-seconds.
Executing "Pick" function and selections from screen in general, would require more time than expected on big models (of approximately100.000 shells and > 600.000 volume elements) containing Sets on Ranges.
TOPO
Unexpected termination could occur when using "Fillet" option to create a fillet with a specific radius, when just a single curve was selected.
Shell Mesh
A Display Model from Shells and Facets can now be successfully generated. This functionality stopped operating in version 24.1.0, when Solid Facets were selected, while not being attached to any Shell element.
Volume Mesh
Unexpected termination could occur when activating the Mesh Parameters of a HeXtreme Area.
FE Representations
ANSA would cease operating upon Realize execution on Superelement entities.
DECKs
Executing the "File > Input" function would take excessive time when a grammar-spelling software was running.
General numbering rules for SPOTWELD and COORDINATE_SYSTEM would not be written properly in Comments and would not be saved in *.ansa_rules file.
The special numbering rules for all properties except PSHELL, LAMINATE and PCOMP would not be stored in ANSA db.
Nastran
Unexpected termination would occur when the DLOAD sets list was docked and a new B.C.SETs entity would be created.
Visibility actions on Contacts, such as "Show", "Hide", and "Show only", did not work properly when applied through the context menu of the Database Browser.
Laminates
Unexpected termination could occur, while working with Laminate Tool, once the Layers Fringe became active.
In addition, material names were not written properly in the FiberSim *.h5 file.
Known issues resolved in EPILYSIS
Performance
Excessive time would be required for the calculation of PFGRID without the use of AMLS.
Calculation
The calculation of GA/GB projections inside auxiliary points quad patch would not be correct for ELPAT and PARTPAT types of connection.
SOL200
Disk space usage in large optimization cases (of approximately 50 subcases) would be unnecessarily excessive.
The output of sensitivities for DRESP1 FUNC in case of DSAPRT on DRESP sets would be wrong.
Known issues resolved in META
Graphics
Polyhedral elements were not drawn correctly when per element color or transparency was set.
Decks
Nastran: Very large datasets (> 400 modes) of *.h5 files were not handled correctly.
Abaqus: Unexpected termination could occur when reading corrupted fields from an *.odb file.
LS-DYNA: *PARAMETER keyword was not read correctly, leading to erroneous geometry.
Permas: Contact forces could not be read from *.hdf and *.post files.
Optistruct: Frequency from PSD results was not recognized properly in the animation bar.
Managing Curve Data
"_Combine_", "_Subtract_", " _Divide_" calculations would not operate as expected.
NVH Calculators
NVH calculator settings would not be saved correctly in META.defaults file when the tool was initialized after the settings were saved.
Scripting
Function plot2d.CurvesTypesAbaqusWithNames() would occasionally not return the entity names.
Known issues resolved in KOMVOS
Machine Learning
The Interactive Prediction window would not open due to very small design variable bound values.
Scripting
Script actions related to ANSA or META applications would not be successfully executed.
Known issues resolved in FATIQ
GUI
Fields: Start, End, Offset, Scale and Repeats of Assign Loads window in time domain would falsely accept blank values.
Calculations
For results Log of Damage and Log of Life, natural logarithm was returned instead of log10.
Task
FATIQ would unexpectedly terminate when deleting multiple tasks.
General
Units" conversion through "Settings > Resolution/Tolerances/Units [Units> Scale]" would take excessive time. It is now accelerated from minutes to milli-seconds.
Executing "Pick" function and selections from screen in general, would require more time than expected on big models (of approximately100.000 shells and > 600.000 volume elements) containing Sets on Ranges.
TOPO
Unexpected termination could occur when using "Fillet" option to create a fillet with a specific radius, when just a single curve was selected.
Shell Mesh
A Display Model from Shells and Facets can now be successfully generated. This functionality stopped operating in version 24.1.0, when Solid Facets were selected, while not being attached to any Shell element.
Volume Mesh
Unexpected termination could occur when activating the Mesh Parameters of a HeXtreme Area.
FE Representations
ANSA would cease operating upon Realize execution on Superelement entities.
DECKs
Executing the "File > Input" function would take excessive time when a grammar-spelling software was running.
General numbering rules for SPOTWELD and COORDINATE_SYSTEM would not be written properly in Comments and would not be saved in *.ansa_rules file.
The special numbering rules for all properties except PSHELL, LAMINATE and PCOMP would not be stored in ANSA db.
Nastran
Unexpected termination would occur when the DLOAD sets list was docked and a new B.C.SETs entity would be created.
Visibility actions on Contacts, such as "Show", "Hide", and "Show only", did not work properly when applied through the context menu of the Database Browser.
Laminates
Unexpected termination could occur, while working with Laminate Tool, once the Layers Fringe became active.
In addition, material names were not written properly in the FiberSim *.h5 file.
Known issues resolved in EPILYSIS
Performance
Excessive time would be required for the calculation of PFGRID without the use of AMLS.
Calculation
The calculation of GA/GB projections inside auxiliary points quad patch would not be correct for ELPAT and PARTPAT types of connection.
SOL200
Disk space usage in large optimization cases (of approximately 50 subcases) would be unnecessarily excessive.
The output of sensitivities for DRESP1 FUNC in case of DSAPRT on DRESP sets would be wrong.
Known issues resolved in META
Graphics
Polyhedral elements were not drawn correctly when per element color or transparency was set.
Decks
Nastran: Very large datasets (> 400 modes) of *.h5 files were not handled correctly.
Abaqus: Unexpected termination could occur when reading corrupted fields from an *.odb file.
LS-DYNA: *PARAMETER keyword was not read correctly, leading to erroneous geometry.
Permas: Contact forces could not be read from *.hdf and *.post files.
Optistruct: Frequency from PSD results was not recognized properly in the animation bar.
Managing Curve Data
"_Combine_", "_Subtract_", " _Divide_" calculations would not operate as expected.
NVH Calculators
NVH calculator settings would not be saved correctly in META.defaults file when the tool was initialized after the settings were saved.
Scripting
Function plot2d.CurvesTypesAbaqusWithNames() would occasionally not return the entity names.
Known issues resolved in KOMVOS
Machine Learning
The Interactive Prediction window would not open due to very small design variable bound values.
Scripting
Script actions related to ANSA or META applications would not be successfully executed.
Known issues resolved in FATIQ
GUI
Fields: Start, End, Offset, Scale and Repeats of Assign Loads window in time domain would falsely accept blank values.
Calculations
For results Log of Damage and Log of Life, natural logarithm was returned instead of log10.
Task
FATIQ would unexpectedly terminate when deleting multiple tasks.
BETA-CAE Systems 24.1.1
BETA-CAE Systems 24.1.1
BETA-CAE Systems 24.1.1
BETA CAE Systems is an engineering software company committed to the development of best-in-class CAE software systems that meet the requirements of all simulation disciplines. Amongst the company’s products, the ANSA pre-processor and the µETA post-processor, hold a worldwide leading position, in many sectors, including the automotive, railway vehicles, aerospace, motorsports, chemical processes engineering, energy, electronics, heavy machinery, power tools, and biomedical.
ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the required functionality for full-model build up, from CAD data to ready-to-run solver input file, in a single integrated environment. ANSA is the users' preference due to its wide range of features and tools that meet their needs. The list of productive and versatile features is long and the alternative tasks and processes to be completed using them are countless.
META is a thriving multi-purpose post-processor that meets the diverce needs of various CAE disciplines for processing solver results until a complete reporting. It owes its success to its impressive performance, innovative features and capabilities of interaction between animations, plots, videos, reports and other objects. Offered in a package with ANSA or as a single product, META with its high performance and level of automation and customization, eliminates the need for use of any other post processing tool.
Porting product data and meta-data from diverse CAD systems to CAE pre-processing is a challenging task that requires advanced and configurable tools. The CAD data to ANSA translators meet the industries requirements by offering a wide portfolio of supported CAD formats, settings and options. Offered with ANSA or as add-on to it, the translators, allow the trouble-free kick off of the CAE processing.
BETA CAE Systems Solutions for Biomechanics
Watch this video and find out how BETA CAE Systems software products will help you streamline your Biomechanics simulations.
BETA CAE Systems Inc. develops and provides CAE software systems for the automotive, aerospace, energy and power industries. BETA CAE Systems S.A. was founded in 1999. BETA CAE Systems S.A.'s headquarters is located in Lucerne, Lucerne, CH 6039. BETA CAE Systems S.
Owner: BETA CAE Systems Inc.
Product Name: BETA CAE Simulation Solutions
Version: 24.1.1
Supported Architectures: x64
Website Home Page : www.beta-cae.com
Languages Supported: english
System Requirements: Windows *
Size: 2.1 Gb
BETA-CAE Systems 24.1.1
Compatibility and Supported Platforms
- ANSA files saved by all the first and second point releases of a major version are compatible to each other. New major versions can read files saved by previous ones but not vice versa.
- META Project files saved from version 24.1.1 are compatible and can be opened by META version 16.0.0 or later.
- Support for Windows 7 has been discontinued.
- Support for Red Hat 6, and other Red Hat 6 compatible Linux distributions has been discontinued.
- Support for Mac OS has been discontinued.
- Support for 32-bit platform has been discontinued for all operating systems.
Please visit my blog
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
![BETA-CAE Systems 24.1.1]()
Added by 3% of the overall size of the archive of information for the restoration
No mirrors please
BETA-CAE Systems 24.1.1
